Telecom Infra Services

At Nectar Infotel, our endeavor is to offer world-class active and passive Telecom Infrastructure - Operations, Services and add maximum value to the Telecom Operators.

Mobile Telecom Services

As a true pioneer in the field,
we have deep understanding of operator's needs, aspirations & dynamics of the market.

Nectar Infotel is currently providing services in 2G/3G/4G technologies to different operators in Indian and African sub-continent through its expertise in managing telecom services in active and passive infrastructure within below categories. Our business model of services sharing is based on building, owning, operating & maintaining telecom infrastructure sites capable of hosting multipleservice providers (CMSPs, Wireless Broadband and Data Centres). This model enables an operator to convert their capital expenditure to a fixed and predictable operational expenditure, thereby allowing them to divert precious capital towards core activities.

Complete telecommunication infrastructure setup & operation maintenance (2G/3G/4G/LTE) BTS, BSC, MSC, MW, HOP/ Radio, Swapping, co-locations etc. Also, Radio Network Planning, Implementation and RF Optimization/ RF quality control (2G/3G/4G/LTE).

CME Services

CME - is abbreviation of Civil, Mechanical and Electrical work involved in the Telecom projects. To construct the Tower, Shelter and other related works we need the basic structure of Civil, Mechanical and Electrical.

We can provide the following services and support for the Telecom Passive infra :

- Data Center Modernization

- Telecom Site’s Automation

- Fuel Monitoring System

- Inventory Management

- Civil Design and Construction

  • Tower
  • Shelter
  • Others

- Electrical

  • Design
  • Modernization
  • Projects

- Tower Design, Supply & Installation

- Shelter Design, Supply & Installation

- Battery Bank Design, Supply & Installation

- HVAC

  • Solutions
  • Products Supply & Installation

- AC-DC Power Conversions as well as DC-DC Power Conversion Requirements

  • Supply
  • Projects
  • Installation and Commissioning

- Solar Project Solutions

Telecom Network Infrastructure Services

Nectar Infotel Solutions Pvt Ltd has expertise in mobile equipment installation, commissioning and work of acceptance and testing for GSM (2G, 3G, 4G, LTE), WiMAX, CDMA BTS. We undertake the following product's installation work & services:

- BTS Site Survey, to provide Site Survey detail report along with built drawings / Engineering Site Survey for GSM (2G, 3G), WiMAX, CDMA BTS.
- To work on Site Survey Planning.
- To provide detailed Site Survey Report which strictly complies to the customer requirement.
- Documentation for Site, Including Equipment, Layout Drawing.
- Documentation for Indoor & Outdoor Cable Routing.

- Un-packaging Goods verification, shifting and intimating the customer in case of urgency.
- Installation of BTS Rack as per layout plan.
- Battery Bank installation.
- Rectifier Rack/ SMPS installation.
- Indoor cable tray installation.
- Horizontal cable tray fitting, pendulum support installation and grouting.
- FEP cutting, finishing, sealing, jumper routing, termination etc.
- Interconnection & cabling of BTS.
- DDF Installation.
- E1 Cable Routing and Punching on DDF.
- Alarm Cable Routing.
- Antenna fixtures and mount installation.
- Antenna installation & alignment.
- Feeder routing, earthing, weather proofing & labelling.
- RF Jumper Cable Connector Making.
- RF Jumper Cable Routing and Connecting to Existing Surge Arrestor.
- DC connection to mini-link through DCDB / MCB.
- Earthing of Rack, IF as per site engineer instruction.
- Checking of VSWR.
- GPS Antenna Mount and cable routing.
- Labelling of all the cables, sectors and jumpers as per customer standard.
- Preparing and Submitting Hardware Installation Report.
- Sector addition work, BTS Configuration and re-configuration work.

- Un-packaging and Goods Verification and Shifting and intimate the customer in case of exigency. - Installation of BTS Rack as per layout plan.
- Battery Bank installation.
- Rectifier Rack/ SMPS installation.
- Cable tray installation as per requirement.
- FEP cutting, finishing, sealing, jumper routine, making of connector and termination.
- Interconnection & cabling of BTS.
- Installation of DCDB and extension of power cables to the equipment.
- Battery Bank installation.
- Power Cable and Grounding Cable routing and Terminate to MCB or EGB.
- Installation of transmission rack.
- DDF Installation.
- E1 Cable Routing and Punching on DDF.
- Alarm Cable Routing.
- Antenna fixtures and mount installation.
- Antenna installation & alignment.
- Feeder routine, Earthing, weather proofing & labelling.
- RF Jumper Cable Connector Making.
- RF Jumper Cable Routing and Connect to Existing Surge Arrestor.
- Checking of VSWR.
- GPS Antenna Mount and cable routing.
- Labelling of all the cables, sectors and jumpers as per customer standard.
- Prepare and Submit Hardware Installation Report.
- Sector addition work, BTS Configuration and re-configuration work.

- RFI check in near-end and far-end besides ensuring the site permissions.
- Material reception at both ends and checking as per packing list and intimate the customer in case of exigency.
- Assembling and hoisting of MW antennas & radios on tower in both ends.
- Clamping and routing of IF cables from Shelter to Antennae in both ends.
- Grounding the antennae and RF cables at appropriate place.
- Fixing Transmission rack if required in both ends.
- Installation & commissioning of IDUs in shelters.
- Alignment of MW antennae till we achieve required reception level.
- Grounding, weather proofing and labelling all cables at both ends.
- DC connection to mini-link through DCDB / MCB.
- Earthing of Rack, IF as per Site Engineer instruction.
- Marking on MW antennae on both ends.
- Labelling of all the cables, sectors and jumpers as per customer standard.

- BTS Power on and Card Check.
- Transmission Connectivity Integration.
- Integrate BTS with BSC.
- Call Tests and Record Result.
- Extension of External Alarm and Alarm Testing.
- Labelling for all Cables and Sectors.

- Laying & Termination of OFC Cables, I/F Cables, Feeder Cables in BSC, MSC & Switch Rooms
- Optical (DWDM - SDH / PDH)

- Uninstallation of existing BTS
- Uninstallation of all necessary power, alarm, jumper & E1 cables with alarm panel
- Uninstallation of power plant and battery bank
- Uninstallation of DC-DC converter
- Uninstallation of any other equipment (like BNC panel, balun,….etc)
- Swapping of existing BTS with RBS
- Installation & grouting of RBS
- Necessary cabling & power on of equipment & installation of alarm
- Commissioning of RBS including alarm extension to OMCR
- Alarm extension to OMCR as per requirement
- Power plant and battery bank installation
- DC-DC converter installation

- Unpacking the BTS/Radio/Antenna and associated accessories at Site.
- Installation & Commissioning of BTS as per OEM Specification.
- Installation and commissioning of RRU/GSM antenna as per the defined Orientation and Tilt.
- Laying and fixing of feeder cables with clamps, Earthing and Weather proofing as per site.
- Installation and Commissioning of all Auxiliary Items such as Transmission Racks, DDF, Hatch Plates, Cable Trays (internal and external as per Site requirements).
- Installation and Commissioning of all Auxiliary Items such as SMPS, Rectifiers.
- Installation and Commissioning of Auxiliary Items such as Batteries.
- Setting SMPS and Batteries to correct working condition including setting battery Charging current in SMPS.
- Extension of Power supply to Concerned equipment and energizing the hardwares.
- Extension of alarms Testing and verification with OMC.
- Earthing for internal & external ladder and all telecom and power equipment as specified By the Client.

- Preparing ATP Document for Testing.
- Arranging Testing Record.
- To get Hardware Installation Acceptance Certification.
- Organizing ATP testing.
- Filling the check list and execution of quality audit.
- Sign-off ATP Certificate.
- Preparing and Submitting Site Folder.

- Uninstallation of Indoor/outdoor BTS
- Uninstallation of Microwave HOB/Radio Link
- Uninstallation of Feeder Cables
- Uninstallation of Antennae